Pay attention when using 200-liter plastic drums

Plastic barrels are one of the indispensable packaging and transportation tools in people's lives. I believe everyone knows its superior performance. But no matter how good the product is, it has more or less defects in it. These are the problems we should pay attention to in life and use. This is unavoidable. The following editors will give you a mention to prevent customers from using the plastic barrels to cause unnecessary losses caused by leakage.

    1. The outer cover of the plastic barrel assembly needs to be tightened by external force (the torque wrench can be used to tighten the wrench). The 200 liter plastic barrel, 100 liter plastic barrel, and 50 liter plastic barrel seal ring must be in close contact with the surface of the barrel mouth after assembly. The seal ring is prohibited. Twist the assembly.

    2. If the temperature of the filling product is higher than 40 ° C, the filling and tightening of the outer cover and stacking must be carried out when the product temperature is cooled to room temperature; when stacking, pay attention to the stacking leveling, the contact area between the upper and lower layers of the stack should be kept the maximum Positive, misplaced stacking is prohibited; this can avoid deformation of plastic barrels.

    3. If the filling product is easy to produce volatile gas, especially in February, April and August with obvious temperature difference effect, you should choose the lowest time of the day to fill, so as to avoid the collapse of the deformed image.