Analytical solution to the correct use of 200 liter plastic barrel

Analysis on the correct use of 200 liter plastic barrel

200 liter plastic barrel plays an important role in our daily life, which has brought great help to our production and life. So when we use 200 liter plastic barrel everyday, have we adopted the right method? Let's check it!

The general material of 200 liter plastic barrel is PVC plastic products. At a higher temperature, such as about 50 ℃, hydrogen chloride gas will be slowly decomposed, which is harmful to human body. Therefore, PVC products are not suitable for food packaging. Bakelite contains free phenol and formaldehyde, which is toxic to human body. It is not suitable for food storage and packaging. Although it is odorless and tasteless, when it is used in boiling water of 100 degrees or vinegar food, it will have free formaldehyde, which is harmful to human body, so it is not suitable to be used as tableware or food packaging.

200L plastic bucket

Because of its complex composition, it is difficult to ensure that the waste plastic renewables do not have toxicity, so they are generally not used as food containers and packaging PVC plastic products at a higher temperature, such as about 50 degrees, will slowly decompose hydrogen chloride gas, which is harmful to human body, so PVC products are not suitable as food packaging.

200L plastic bucket is a kind of equipment specially used in chemical industry, which can hold all kinds of chemical liquid. Because of the particularity of chemical plastic barrel, we should pay more attention to it when we store it. The 200 liter plastic barrel is better stacked with double-sided flat tray after packing goods. The size of tray shall not be more than 1.3m, and each tray shall be piled up with one layer. The edge of the 200 liter plastic bucket should not exceed the edge of the tray, and attention should be paid to the center of gravity during the placement process. Then, the shelf life of 200 liter plastic barrel is 2 years from the date of production. Moreover, the chemical plastic bucket is better to be stored under the hood, so it is required to prevent exposure to the sun. And the storage temperature is also limited, which is better below 40 ℃ and above minus 18 ℃.

Finally, when stacking chemical plastic barrels, it is better to use winding film to pack and fix them, and prevent mutual kneading and deformation during packing, etc., and the number of layers should also be determined, so as to ensure the flatness of the ground and its horizontal position.